Show Interfaces Access-Lists - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
48
792
Standard IP access list ACL1
permit 192.168.0.0/16 10.1.1.1
Extended IP access list ACL2
permit 234 172.30.19.1 0.0.0.255 any time-range weekdays
permit 234 172.30.23.8 0.0.0.255 any time-range weekdays
switchxxxxxx#show access-lists time-range-active
Extended IP access list ACL1
permit 234 172.30.40.1 0.0.0.0 any
permit 234 172.30.8.8
Extended IP access list ACL2
permit 234 172.30.19.1 0.0.0.255 any time-range weekdays
switchxxxxxx#show access-lists ACL1
Standard IP access list ACL1
permit 0.0.0.0
permit 192.168.0.2, wildcard bits 0.0.0.255
Extended IP access list ACL1
permit 234 172.30.40.1 0.0.0.0 any
permit 234 172.30.8.8
48.16 show interfaces access-lists
Use the show interfaces access-lists Privileged EXEC mode command to display
access lists (ACLs) applied on interfaces.
Syntax
show interfaces access-lists
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, port-channel or VLAN.
0.0.0.0 any
0.0.0.0 any
[interface-id]
78-21075-01 Command Line Interface Reference Guide
ACL Commands
Advertisement
Table of Contents
