29
444
Port
Status
Learning
------- --------
---------
gi1
Enabled
Max-
Addresses
gi2
Disabled
Max-
Addresses
gi3
Enabled
Lock
The following table describes the fields shown above.
Field
Description
Port
The port number.
Status
The port security status. The possible values are:
Enabled or Disabled.
Action
The action taken on violation.
Maximum
The maximum number of addresses that can be
associated on this port in the Max-Addresses mode.
Trap
The status of SNMP traps. The possible values are:
Enable or Disable.
Frequency
The minimum time interval between consecutive
traps.
29.33 show ports security addresses
Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses
Parameters
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed—Displays information for non-present ports in addition to present
ports.
Action
Maximum
Trap
------
---
-------
Discard
3
Enabled 100
-
28
-
Discard, 8
Disabled -
Shutdown
[interface-id | detailed
78-21075-01 Command Line Interface Reference Guide
Address Table Commands
Frequency
--------
-
]