Cisco 300 Series Cli Manual page 748
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
44
748
User Guidelines
This command provides output similar to the show ip route command, except that
the information is IPv6-specific.
ipv6-address
When the
longest match lookup is performed from the routing table and only route
information for that address or network is displayed.
When the icmp, nd, connected, local, or static keywords are specified, only that
type of route is displayed. When the
specified interface-specific routes are displayed.
Examples
Example 1—The following is sample output from the show ipv6 route command
when IPv6 Routing is not enabled and the command is entered without an IPv6
address or prefix specified:
show ipv6 route
Codes: > - Best
S - Static, I - ICMP Redirect, ND - Router Advertisment
[d/m]: d - route's distance, m - route's metric
IPv6 Routing Table - 6 entries
S> ::/0 [1/1]
via fe80::77
VLAN 1
ND> ::/0
[11/0]
via fe80::200:cff:fe4a:dfa8 VLAN 1 Lifetime 1784 sec
ND> 2001::/64 [0/0]
via :: VLAN 100
ND> 2002:1:1:1::/64 [0/0]
via :: VLAN 100
ND> 3001::/64 [0/0]
via :: VLAN 101
ND> 4004::/64 [0/0]
via :: VLAN 110
ipv6-prefix
prefix-length
or
/
interface-id
78-21075-01 Command Line Interface Reference Guide
IPv6 Router Commands
argument is specified, a
argument are specified, only the
Advertisement
Table of Contents
