Cisco 300 Series Cli Manual page 747

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

IPv6 Router Commands

78-21075-01 Command Line Interface Reference Guide

ipv6-address

show ipv6 route [

interface-id

ipv6-address—Displays routing information for a specific IPv6 address.

This argument must be in the form documented in RFC4293 where the

address is specified in hexadecimal using 16-bit values between colons.

ipv6-prefix—Displays routing information for a specific IPv6 network. This

argument must be in the form documented in RFC4293 where the address

is specified in hexadecimal using 16-bit values between colons.

/prefix-length—The length of the IPv6 prefix. A decimal value that indicates

how many of the high-order contiguous bits of the address comprise the

prefix (the network portion of the address). A slash mark must precede the

decimal value.

protocol—Displays routes for the specified routing protocol using the

keyword: rip or one of the following.

local—Displays local routes.

connected—Displays connected routes.

static—Displays static routes.

icmp—Displays ICMP routes.

nd—Displays router advertisements.

interface-id

Default Configuration

All IPv6 routing information for all active routing tables is displayed.

Command Mode

Privileged EXEC

ipv6-prefix/prefix-length

—Identifier of an interface whose routes are