Bridge Multicast Ip-Address - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
29
408
•
port-channel-list
port-channel
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
No forbidden addresses are defined.
Default option is add.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Before defining forbidden ports, the Multicast group should be registered, using
bridge multicast
address.
You can execute the command before the VLAN is created.
Example
The following example forbids MAC address 0100.5e02.0203 on port
VLAN 8.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
gi9
add
29.5
bridge multicast ip-address
Use the bridge multicast ip-address Interface Configuration (VLAN) mode
command to register IP-layer Multicast addresses to the bridge table, and
statically add or remove ports to or from the group. Use the no form of this
command to unregister the IP address.
Syntax
bridge multicast ip-address
interface-list
|
port-channel port-channel-list
no bridge multicast ip-address
—Specifies a list of port channels. Separate
8
interface vlan
bridge multicast address
bridge multicast forbidden address
ip-multicast-address [[add | remove] {ethernet
}]
ip-multicast-address
78-21075-01 Command Line Interface Reference Guide
Address Table Commands
within
gi9
0100.5e02.0203
0100.5e02.0203
Advertisement
Table of Contents
