Show Vlan Macs-Groups - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Virtual Local Area Network (VLAN) Commands
78-21075-01 Command Line Interface Reference Guide
User Guidelines
MAC-based VLAN rules cannot contain overlapping ranges on the same interface.
The VLAN classification rule priorities are:
1. MAC-based VLAN (Best match among the rules).
1.
Subnet-based VLAN (Best match among the rules).
2.
Protocol-based VLAN.
3.
PVID.
Example
The following example creates two groups of MAC addresses, sets a port to
general mode and maps the groups of MAC addresses to specific VLANs.
switchxxxxxx(config)#
switchxxxxxx(config-vlan)# map mac 0000.1111.0000 32 macs-group 1
switchxxxxxx(config-vlan)# map mac 0000.0000.2222 host macs-group 2
switchxxxxxx(config-vlan)# exit
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# switchport mode general
switchxxxxxx(config-if)# switchport general map macs-group 1 vlan 2
switchxxxxxx(config-if)# switchport general map macs-group 2 vlan 3
32.22 show vlan macs-groups
Use the show vlan macs-groups EXEC mode command to display the MAC
addresses that belong to the defined MACs-groups.
Syntax
show vlan macs-groups
Parameters
N/A
Default Configuration
N/A
vlan database
32
511
Advertisement
Table of Contents
