Policy-Map - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
49
Quality of Service (QoS) Commands
Default Configuration
No match criterion is supported.
Command Mode
Class-map Configuration mode.
Example
The following example defines a class map called Class1. Class1 contains an ACL
called enterprise. Only traffic matching all criteria in enterprise belong to the class
map.
switchxxxxxx(config)#
class-map
class1
switchxxxxxx(config-cmap)#
enterprise
match access-group
49.7
policy-map
A policy map contains one or more class maps and an action that is taken if the
packet matches the class map. Policy maps may be bound to ports/port-channels.
Use the policy-map Global Configuration mode command to creates a policy map
and enter the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
This command is only available when QoS is in advanced mode.
Syntax
policy-map-name
policy-map
policy-map-name
no policy-map
Parameters
policy-map-name—Specifies the policy map name.
Default Configuration
N/A
Command Mode
Global Configuration mode
800
78-21075-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
