Table of Contents
Advertisement
4
167
Port
Status
Learning
------- --------
---------
gi11
Enabled
Addresses
gi12
Disabled
Addresses
gi13
Enabled
The following table describes the fields shown above.
Field
Description
Port
The port number.
Status
The port security status. The possible values are:
Enabled or Disabled.
Action
The action taken on violation.
Maximum
The maximum number of addresses that can be
associated on this port in the Max-Addresses mode.
Trap
The status of SNMP traps. The possible values are:
Enable or Disable.
Frequency
The minimum time interval between consecutive
traps.
4.33 show ports security addresses
To display the current dynamic addresses in locked ports, use the show ports
security addresses Privileged EXEC mode command.
Syntax
show ports security addresses [
Parameters
•
interface-id
—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Action
Maximum
------
---
Max-
Discard
Max-
-
Lock
Discard
interface-id
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Address Table Commands
Trap
Frequency
-------
--------
3
Enabled
28
-
8
Disabled
| detailed]
100
-
-
Advertisement
Table of Contents
