Table of Contents
Advertisement
29
IPv6 First Hop Security
Example 4—In the following example, Neighbor Binding Integrity detaches policy
policy1 detached to the gi11 port:
switchxxxxxx(config)#
interface gi11
switchxxxxxx(config-if)#
no ipv6 neighbor binding attach-policy policy1
switchxxxxxx(config-if)# exit
29.43 ipv6 neighbor binding attach-policy
(VLAN mode)
To attach a Neighbor Binding policy to a specific VLAN, use the ipv6 neighbor
binding attach-policy command in VLAN Configuration mode. To return to the
default, use the no form of this command.
Syntax
policy-name
ipv6 neighbor binding attach-policy
no ipv6 neighbor binding attach-policy
Parameters
•
policy-name
—The Neighbor Binding policy name (up to 32 characters).
Default Configuration
The Neighbor Binding default policy is applied.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
Use this command to attach a Neighbor Binding policy to a VLAN.
policy-name
If a policy specified by the
argument is not defined, the command is
rejected.
Use the no form of the command to return to detach the current policy and
reattach the default policy. The no form of the command has no effect if the default
policy was attached.
667
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
