Table of Contents
Advertisement
DHCP Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
switchxxxxxx(config-dhcp)#
12.19 option
To configure the DHCP server options, use the option command in DHCP Pool
Network Configuration mode or in DHCP Pool Host Configuration mode. To
remove the options, use the no form of this command.
Syntax
code
option
{boolean {false | true} | integer
address
ip-address1
{
} | ip-list {
code
no option
Parameters
•
code
—Specifies the DHCP option code. The supported values are defined
in the User Guidelines.
•
boolean {false | true}—Specifies a boolean value. The values are coded by
integer values of one octet: 0 = false and 1 = true.
•
value
integer
—Specifies an integer value. The option size depends on the
option code.
•
string
ascii
—Specifies a network virtual terminal (NVT) ASCII character
string. ASCII character strings that contain white spaces must be delimited
by quotation marks. The ASCII value is truncated to the first 160 characters
entered.
•
address
ip
—Specifies an IP address.
•
ip-list {
ip-address1
•
string
hex
—Specifies dotted hexadecimal data. The hexadecimal value is
truncated to the first 320 characters entered. Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by
a period, colon, or white space.
•
hex none—Specifies the zero-length hexadecimal string.
•
text
description
next-server www.bootserver.com
value
ip-address2
[
[
ip-address2
...]}—Specifies up to 8 IP addresses.
—User description
string
| ascii
| hex {
text
...]}} [description
]
12
string
| none} | ip
306
Advertisement
Table of Contents
