Table of Contents
Advertisement
49
Radius Server Commands
Command Mode
Global Configuration mode
User Guidelines
A rate limit is applied to the traps: not more than one trap of this type can be sent in 10
seconds.
Example
The following example enables sending accounting traps:
switchxxxxxx(config)# radius server
traps accounting
49.12 radius server traps authentication failure
To enable sending traps when an authentication failed and Access-Reject is sent,
use the radius server traps authentication failure command in Global Configuration
mode. To restore the default configuration, use the no form of this command.
Syntax
radius server traps authentication failure
no radius server traps authentication failure
Parameters
N/A
Default Configuration
Failure traps are disabled.
Command Mode
Global Configuration mode
User Guidelines
A rate limit is applied to the traps: not more than one trap of this type can be sent in 10
seconds.
985
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
