Table of Contents
Advertisement
58
1105
Syntax
spanning-tree max-age
no spanning-tree max-age
Parameters
seconds—Specifies the spanning-tree bridge maximum age in seconds. (Range:
6–40)
Default Configuration
The default maximum age is 20 seconds.
Command Mode
Global Configuration mode
User Guidelines
When configuring the maximum age, the following relationships should be
maintained:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)
Example
The following example configures the spanning-tree bridge maximum age to 10
seconds.
switchxxxxxx(config)#
58.6 spanning-tree priority
Use the spanning-tree priority Global Configuration mode command to configure
the device STP priority, which is used to determine which bridge is selected as the
root bridge. Use the no form of this command to restore the default device
spanning-tree priority.
Syntax
spanning-tree priority
seconds
spanning-tree max-age
priority
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Spanning-Tree Commands
10
Advertisement
Table of Contents
