Table of Contents
Advertisement
PHY Diagnostics Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
1
44.1 test cable-diagnostics tdr
To use Time Domain Reflectometry (TDR) technology to diagnose the quality and
characteristics of a copper cable attached to a port, use the test
cable-diagnostics tdr Privileged EXEC mode command.
Syntax
test cable-diagnostics tdr interface
Parameters
interface-id—(Optional) Specifies an Ethernet port ID.
Command Mode
Privileged EXEC mode
User Guidelines
This command does not work on fiber ports (if they exist on the device). The port
to be tested should be shut down during the test, unless it is a combination port
with fiber port active. In this case, it does not need to be shut down, because the
test does not work on fiber ports.
The maximum length of cable for the TDR test is 120 meters.
Examples
- Test the copper cables attached to port gi11 (a copper port).
Example 1
switchxxxxxx#
test cable-diagnostics tdr interface gi1
Cable is open at 64 meters
interface-id
44
1
886
Advertisement
Table of Contents
