Table of Contents
Advertisement
Ethernet Configuration Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Syntax
show interfaces description
Parameters
•
interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
•
detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display description for all interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the description of all configured interfaces.
switchxxxxxx#
show interfaces description
Port
Descriptions
------
---------------------------------------------
gi1
1
Port that should be used for management only
2
gi1
gi1
3
4
gi1
PO
Description
----
-----------
Po1
Output
17.23 show interfaces counters
To display traffic seen by all the physical interfaces or by a specific interface, use
the show interfaces counters Privileged EXEC mode command.
[interface-id | detailed
]
17
404
Advertisement
Table of Contents
