Table of Contents
Advertisement
36
793
The following table describes significant LLDP fields shown in the display:
Field
Port
Device ID
Port ID
System name
Capabilities
System description
Port description
Management
address
Auto-negotiation
support
Auto-negotiation
status
Auto-negotiation
Advertised
Capabilities
Operational MAU
type
Link Layer Discovery Protocol (LLDP) Commands
Description
The port number.
The neighbor device's configured ID (name)
or MAC address.
The neighbor device's port ID.
The neighbor device's administratively
assigned name.
The capabilities discovered on the neighbor
device. Possible values are:
B - Bridge
R - Router
W - WLAN Access Point
T - Telephone
D - DOCSIS cable device
H - Host
r - Repeater
O - Other
The neighbor device's system description.
The neighbor device's port description.
The neighbor device's management address.
The auto-negotiation support status on the
port. (supported or not supported)
The active status of auto-negotiation on the
port. (enabled or disabled)
The port speed/duplex/flow-control
capabilities advertised by the
auto-negotiation.
The port MAU type.
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
