Table of Contents
Advertisement
Smartport Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
55.4 macro auto processing cdp
The macro auto processing cdp Global Configuration mode command enables
using CDP capability information to identify the type of an attached device.
When Auto Smartport is enabled on an interface and this command is run, the
switch automatically applies the corresponding Smartport type to the interface
based on the CDP capabilities advertised by the attaching device(s).
The no format of the command disables the feature.
Syntax
macro auto processing cdp
no macro auto processing cdp
Parameters
This command has no parameters or keywords.
Default Configuration
Enabled
Command Mode
Global Configuration mode
Example
To enable CDP globally:
switchxxxxxx(config)#
55.5 macro auto processing lldp
The macro auto processing lldp Global Configuration mode command enables
using the LLDP capability information to identify the type of an attached device.
When Auto Smartport is enabled on an interface and this command is run, the
switch automatically applies the corresponding Smartport type to the interface
based on the LLDP capabilities advertised by the attaching device(s).
macro auto processing cdp
55
1064
Advertisement
Table of Contents
