Table of Contents
Advertisement
RADIUS Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
•
retries
retransmit
1–15)
•
deadtime
deadtime
RADIUS server is skipped over by transaction requests. (Range: 0–2000)
•
key-string
key
RADIUS communications between the device and the RADIUS server. This
key must match the encryption used on the RADIUS daemon. To specify an
empty string, enter "". (Length: 0–128 characters). If this parameter is
omitted, the globally-configured radius key will be used.
•
key encrypted-
format.
•
priority
priority
has the highest priority. (Range: 0–65535)
•
usage {login | dot1.x | all}—Specifies the RADIUS server usage type. The
possible values are:
-
login—Specifies that the RADIUS server is used for user login
parameters authentication.
-
dot1.x—Specifies that the RADIUS server is used for 802.1x port
authentication.
-
all—Specifies that the RADIUS server is used for user login
authentication and 802.1x port authentication.
Default Configuration
The default authentication port number is 1812.
If timeout is not specified, the global value (set in the
command) is used.
If retransmit is not specified, the global value (set in the
command) is used.
If key-string is not specified, the global value (set in the
command) is used.
If the usage keyword is not specified, the all argument is applied.
Command Mode
Global Configuration mode
—Specifies the number of retry retransmissions (Range:
—Specifies the length of time in minutes during which a
—Specifies the authentication and encryption key for all
key-string
—Same as key-string, but the key is in encrypted
—Specifies the order in which servers are used, where 0
radius-server timeout
radius-server retransmit
radius-server key
48
966
Advertisement
Table of Contents
