Table of Contents
Advertisement
IPv6 First Hop Security
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
The policy can be attached by the
command. The port_default policy is attached by default to a port, if no other
policy is attached to the port.
If an attached policy is removed, it is detached automatically before removing.
Examples
Example 1—The following example defines the IPv6 Source Guard policy named
policy1, places the router in IPv6 Source Guard Policy Configuration mode, and
configures the port as trusted:
switchxxxxxx(config)#
switchxxxxxx(config-ipv6-srcguard)#
switchxxxxxx(config)# exit
Example 2—The following example removes the attached IPv6 Source Guard
policy:
switchxxxxxx(config)#
Policy policy1 is applied on the following ports:
gi11, gi12
The policy1 will be detached and removed, are you sure [Y/N]Y
29.52 logging binding
To enable the logging of Binding table main events within an IPv6 Neighbor
Binding policy, use the logging binding command in Neighbor Binding Policy
Configuration mode. To return to the default, use the no form of this command.
Syntax
logging binding [enable | disable]
no logging binding
ipv6 source guard attach-policy (port mode)
ipv6 source guard policy policy1
trusted-port
no ipv6 source guard policy policy1
29
678
Advertisement
Table of Contents
