Table of Contents
Advertisement
GARP VLAN Registration Protocol (GVRP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Parameters
This command has no arguments or keywords.
Default Configuration
GVRP is disabled on all interfaces.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
An access port does not dynamically join a VLAN because it is always a member
of a single VLAN only. Membership in an untagged VLAN is propagated in the
same way as in a tagged VLAN. That is, the PVID must be manually defined as the
untagged VLAN ID.
Example
The following example enables GVRP on
switchxxxxxx(config)#
switchxxxxxx(config-if)#
19.4 gvrp registration-forbid
To deregister all dynamic VLANs on a port and prevent VLAN creation or
registration on the port, use the gvrp registration-forbid Interface Configuration
mode command. To allow dynamic registration of VLANs on a port, use the no
form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Parameters
This command has no arguments or keywords.
4.
gi1
interface gi14
gvrp enable
19
454
Advertisement
Table of Contents
