Table of Contents
Advertisement
Link Layer Discovery Protocol (LLDP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
User Guidelines
A TLV value that cannot be displayed as an ASCII string is displayed as an
hexadecimal string.
Examples
Example 1 - The following example displays information about neighboring
devices discovered using LLDP on all ports on which LLDP is enabled and who are
up.
Location information, if it exists, is also displayed.
switchxxxxxx#
show lldp neighbors
System capability legend:
B - Bridge; R - Router; W - Wlan Access Point; T - telephone;
D - DOCSIS Cable Device; H - Host; r - Repeater;
TP - Two Ports MAC Relay; S - S-VLAN; C - C-VLAN; O - Other
Port
Device ID
----- ---------------
gi11 00:00:00:11:11:11 gi11 ts-7800-2 B 90
gi11 00:00:00:11:11:11 gi11 ts-7800-2 B 90
gi12 00:00:26:08:13:24 gi13 ts-7900-1 B,R 90
gi13 00:00:26:08:13:24 gi12 ts-7900-2 W 90
Example 2 - The following example displays information about neighboring
devices discovered using LLDP on port 1.
switchxxxxxx#
show lldp neighbors gi11
Device ID: 00:00:00:11:11:11
Port ID: gi11
System Name: ts-7800-2
Capabilities: B
System description:
Port description:
Port ID
System Name Capabilities TTL
-------- ----------
-----------
----
36
790
Advertisement
Table of Contents
