Table of Contents
Advertisement
IP Addressing Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
24.16 show ip dhcp client interface
Use the show ip dhcp client interface command in User EXEC or Privileged EXEC
mode to display DHCP client interface information.
Syntax
show ip dhcp client interface [
Parameters
•
interface-id
—Interface identifier.
Command Mode
User EXEC mode
User Guidelines
If no interfaces are specified, all interfaces on which DHCP client is enabled are
displayed. If an interface is specified, only information about the specified
interface is displayed.
Example
The following is sample output of the show ip dhcp client interface command:
switchxxxxxx#
show ip dhcp client interface
VLAN 100 is in client mode
Address: 170.10.100.100 Mask: 255.255.255.0 T1 120, T2 192
Default Gateway: 170.10.100.1
DNS Servers: 115.1.1.1, 87.12.34.20
DNS Domain Search List: company.com
Host Name: switch_floor7
Configuration Server Addresses: 192.1.1.1 202.1.1.1
Configuration Path Name: qqq/config/aaa_config.dat
Image Path Name: qqq/image/aaa_image.ros
POSIX Timezone string: EST5EDT4,M3.2.0/02:00,M11.1.0/02:00
VLAN 1200 is in client mode
interface-id
]
24
518
Advertisement
Table of Contents
