Show Ip Dhcp Snooping - Cisco Catalyst 3550 Command Reference Manual
Multilayer switch
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (794 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
Chapter 2 Cisco IOS Commands
show ip dhcp snooping
Use the show ip dhcp snooping privileged EXEC command to display the Dynamic Host Configuration
Protocol (DHCP) snooping configuration.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.1(19)EA1
Examples
This is an example of output from the show ip dhcp snooping command.
Switch#show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
40-42
Insertion of option 82 is enabled
Interface
------------------------
FastEthernet0/5
FastEthernet0/7
FastEthernet0/3
FastEthernet0/5
FastEthernet0/7
FastEthernet0/5
FastEthernet0/7
Related Commands
Command
show ip dhcp snooping
binding
78-11195-09
show ip dhcp snooping
Modification
This command was first introduced
Description
Displays the DHCP snooping binding information.
Trusted
Rate limit (pps)
-------
----------------
yes
unlimited
yes
unlimited
no
5000
yes
unlimited
yes
unlimited
yes
unlimited
yes
unlimited
Catalyst 3550 Multilayer Switch Command Reference
show ip dhcp snooping
2-287
Advertisement
Table of Contents
