Show Ip Dhcp Snooping - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:

Table of Contents

show ip dhcp snooping

Use the show ip dhcp snooping user EXEC command to display the DHCP snooping configuration.

Syntax Description

This command has no arguments or keywords.

Command Modes

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show ip dhcp snooping command:

Switch> show ip dhcp snooping

Switch DHCP snooping is enabled

DHCP snooping is configured on following VLANs:

Insertion of option 82 is enabled

------------------------

FastEthernet0/5

FastEthernet0/7

FastEthernet0/3

FastEthernet0/5

FastEthernet0/7

FastEthernet0/5

FastEthernet0/7

Related Commands

show ip dhcp snooping binding

Catalyst 2950 and Catalyst 2955 Switch Command Reference

show ip dhcp snooping

Modification

This command was introduced

Rate limit (pps)

----------------

Displays the DHCP snooping binding information.

Catalyst 2950 and 2955 Cisco IOS Commands

Catalyst 2955