Show Running-Config Vlan - Cisco Catalyst 2950 Command Reference Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Software configuration manual (674 pages) ,
- Command reference manual (408 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands
show running-config vlan
Use the show running-config vlan privileged EXEC command to display all or a range of
VLAN-related configurations on the switch.
Syntax Description
vlan-ids
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(9)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show running-config vlan command:
Switch# show running-config vlan 900-2005
Building configuration...
Current configuration:
!
vlan 107
!
vlan 120
!
vlan 925
!
vlan 1000
end
0L-10102-01
show running-config vlan [vlan-ids] [ | {begin | exclude | include} expression]
(Optional) Display configuration information for a single VLAN identified by
VLAN ID number or a range of VLANs separated by a hyphen. The range is 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show running-config vlan
2-399
Advertisement
Table of Contents
