Police Aggregate - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

police aggregate

Use the police aggregate policy-map class configuration command to apply an aggregate policer to

multiple classes in the same policy map. Use the no form of this command to remove the specified

Syntax Description

aggregate-policer-name

No aggregate policers are defined.

Command Modes

Policy-map class configuration

Command History

Usage Guidelines

You set aggregate policer parameters by using the mls qos aggregate-policer global configuration

You can configure up to 128 policers on ingress Gigabit-capable Ethernet ports.

You can configure up to eight policers on ingress 10/100 Ethernet ports.

You can configure up to eight policers on egress ports.

You apply an aggregate policer to multiple classes in the same policy map; you cannot use an aggregate

policer across different policy maps or interfaces.

Policy maps that contain per-port per-VLAN classification commands cannot be applied to egress

To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,

use the end command.

Catalyst 3550 Multilayer Switch Command Reference

police aggregate aggregate-policer-name

no police aggregate aggregate-policer-name

Modification

This command was first introduced.

Name of the aggregate policer.

Cisco IOS Commands