Cisco Catalyst 3550 Command Reference Manual page 306

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

show interfaces

This is an example of output from the show interfaces flowcontrol command.

in this display.

Switch# show interfaces flowcontrol

Table 2-19 show interfaces flowcontrol Field Descriptions

Send FlowControl

Receive FlowControl

This is an example of output from the show interfaces gigabitethernet0/9 pruning command when

pruning is enabled in the VTP domain:

Switch# show interfaces gigibitethernet0/9 pruning

Catalyst 3550 Multilayer Switch Command Reference

Send FlowControl

Receive FlowControl

-------- -------- -------- --------

Vlans pruned for lack of request by neighbor

Vlans traffic requested of neighbor

RxPause TxPause

------- -------

Displays the port name.

Displays the administrative (configured) setting for the flow

control send mode.

Displays the operational (running) setting for the flow control

Displays the administrative (configured) setting for the flow

control receive mode.

Displays the operational (running) setting for the flow control

receive mode.

Displays the number of pause frames received.

Displays the number of pause frames sent.

Flow control is enabled.

Flow control is disabled.

Flow control is enabled if the other end supports it.

Flow control is not supported.

Chapter 2 Cisco IOS Commands

lists the fields