Show Ip Igmp Profile - Cisco Catalyst 3550 Command Reference Manual
Multilayer switch
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (794 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
show ip igmp profile
show ip igmp profile
Use the show ip igmp profile privileged EXEC command to view all configured Internet Group
Management Protocol (IGMP) profiles or a specified IGMP profile.
Syntax Description
profile number
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(8)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
These are examples of output from the show ip igmp profile privileged EXEC command, with and
without specifying a profile number. If no profile number is entered, the display includes all profiles
configured on the switch.
Switch# show ip igmp profile 40
IGMP Profile 40
Switch# show ip igmp profile
IGMP Profile 3
IGMP Profile 4
Related Commands
Command
ip igmp profile
Catalyst 3550 Multilayer Switch Command Reference
2-290
show ip igmp profile [profile number] [ | {begin | exclude | include} expression]
(Optional) The IGMP profile number to be displayed. The range is from 1 to
4294967295. If no profile number is entered, all IGMP profiles appear.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
permit
range 233.1.1.1 233.255.255.255
range 230.9.9.0 230.9.9.0
permit
range 229.9.9.0 229.255.255.255
Description
Configures the specified IGMP profile number.
Chapter 2 Cisco IOS Commands
78-11195-09
Advertisement
Table of Contents
