Show Ip Igmp Profile - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show ip igmp profile

Use the show ip igmp profile privileged EXEC command to display all configured Internet Group

Management Protocol (IGMP) profiles or a specified IGMP profile.

Syntax Description

profile number

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

These are examples of output from the show ip igmp profile privileged EXEC command, with and

without specifying a profile number. If no profile number is entered, the display includes all profiles

configured on the switch.

Switch# show ip igmp profile 40

IGMP Profile 40

Switch# show ip igmp profile

IGMP Profile 3

IGMP Profile 4

Related Commands

ip igmp profile

Cisco ME 3400 Ethernet Access Switch Command Reference

show ip igmp profile [profile number] [ | {begin | exclude | include} expression]

(Optional) The IGMP profile number to be displayed. The range is 1 to

4294967295. If no profile number is entered, all IGMP profiles are displayed.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

range 233.1.1.1 233.255.255.255

range 230.9.9.0 230.9.9.0

range 229.9.9.0 229.255.255.255

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Configures the specified IGMP profile number.