Debug Backup - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
debug backup
debug backup
Use the debug backup privileged EXEC command to enable debugging of the Flex Links backup
interface. Use the no form of this command to disable debugging.
This command is available only when the switch is running the metro access or metro IP access image.
Syntax Description
all
errors
events
vlan-load-
balancing
Command Default
Backup interface debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
12.2(37)SE
Usage Guidelines
The undebug backup command is the same as the no debug backup command.
Related Commands
Command
show debugging
Cisco ME 3400 Ethernet Access Switch Command Reference
B-2
debug backup {all | errors | events | vlan-load-balancing}
no debug backup {all | errors | events | vlan-load-balancing}
Display all backup interface debug messages.
Display backup interface error or exception debug messages.
Display backup interface event debug messages.
Display backup interface VLAN load balancing.
Modification
This command was introduced.
Added vlan-load-balancing keyword.
Description
Displays information about the types of debugging that are enabled.
Appendix B
Cisco ME 3400 Ethernet Access Switch Debug Commands
OL-9640-10
Advertisement
Table of Contents
