hit counter script

Conform-Action - Cisco ME 3400 Command Reference Manual

Ethernet access switch
Table of Contents

Advertisement

Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

conform-action

Use the conform-action policy-map class police configuration command to set multiple actions for a
policy-map class for packets that conform to the committed information rate (CIR). Use the no form of
this command to cancel the action or to return to the default action.
Note
Although visible in the command-line help, the conform-action color action is not supported.
Syntax Description
set-cos-transmit
new-cos-value
set-dscp-transmit
new-dscp-value
set-prec-transmit
new-precedence-value
set-qos-transmit
qos-group-value
cos
dscp
precedence
table table-map name
transmit
Defaults
The default conform action is to send the packet.
OL-9640-10
conform-action {set-cos-transmit {new-cos-value | [cos | dscp | precedence] [table table-map
name]} | set-dscp-transmit {new-dscp-value | [cos | dscp | precedence] [table table-map
name]} | set-prec-transmit {new-precedence-value | [cos | dscp | precedence] [table
table-map name]} | set-qos-transmit qos-group-value | transmit]}
no conform-action {set-cos-transmit {new-cos-value | [cos | dscp | precedence] [table table-map
name]} | set-dscp-transmit {new-dscp-value | [cos | dscp | precedence] [table table-map
name]} | set-prec-transmit {new-precedence-value | [cos | dscp | precedence] [table
table-map name]} | set-qos-transmit qos-group-value | transmit]}
Set a new class of service (CoS) value for the packet and send the packet.
This specifies the to-type of the marking action. The range for the new CoS
value is 0 to 7.
Set a new Differentiated Services Code Point (DSCP) value for the packet
and send the packet. This specifies the to-type of the marking action. The
range for the new DCSP value is 0 to 63.
Set a new IP precedence value for the packet and send the packet. This
specifies the to-type of the marking action. The range for the new IP
precedence value is 0 to 7.
Set a new quality of service (QoS) group value for the packet and send the
packet. This specifies the to-type of the marking action. The range for the
new QoS value is 0 to 99.
(Optional) Set the packet marking specified in the preceding keyword based
on the CoS value of the incoming packet, and send the packet. This specifies
the from-type of the enhanced packet-marking action.
(Optional) Set the packet marking specified in the preceding keyword based
on the DSCP value of the incoming packet, and send the packet. This
specifies the from-type of the enhanced packet-marking action.
(Optional) Set the packet marking specified in the preceding keyword based
on the IP precedence value of the incoming packet, and send the packet. This
specifies the from-type of the enhanced packet-marking action.
(Optional) Used in conjunction with the preceding from-type keyword.
Specify the table map to be used for the enhanced packet marking. The
to-type of the action is marked based on the from-type parameter of the
action using this table map.
(Optional) Send the packet unmodified.
Cisco ME 3400 Ethernet Access Switch Command Reference
conform-action
2-57

Advertisement

Table of Contents
loading

Table of Contents

Save PDF