Show Controllers Cpu-Interface - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show controllers cpu-interface

Use the show controllers cpu-interface privileged EXEC command to display the state of the CPU

network interface ASIC and the send and receive statistics for packets reaching the CPU.

Syntax Description

Command Modes

Privileged EXEC

Command History

Usage Guidelines

This display provides information that might be useful for Cisco technical support representatives

troubleshooting the switch.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is a partial output example from the show controllers cpu-interface command:

Switch# show controllers cpu-interface

cpu-queue-frames

----------------- ---------- ---------- ---------- ----------

routing protocol

remote console

sw forwarding

igmp snooping

cpu heartbeat

show controllers cpu-interface [ | {begin | exclude | include} expression]

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Command Reference

show controllers cpu-interface