Show Errdisable Detect - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show errdisable detect
Use the show errdisable detect user EXEC command to display error-disable detection status.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)EX
12.2(37)SE
Usage Guidelines
The
•
•
•
A displayed
(SFP) interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show errdisable detect command:
Switch> show errdisable detect
ErrDisable Reason
-----------------
arp-inspection
bpduguard
channel-misconfig
community-limit
dhcp-rate-limit
dtp-flap
gbic-invalid
invalid-policy
l2ptguard
link-flap
link-monitor-fail
OL-9640-10
show errdisable detect [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The
column shows the shutdown mode that was configured for the error-disabled reason:
Mode
port—The physical port is error disabled if a violation occurs.
vlan—The virtual port is disabled if a violation occurs.
port/vlan—Some ports are configured for physical port disable, and others are configured for virtual
port disable. Enter the show running config privileged EXEC command to see the configuration for
each port.
error in the
gbic-invalid
Detection
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
column was added to the output display.
Mode
column refers to an invalid small form-factor pluggable
Reason
Mode
----
port
port
port
port
port
port
port
port
port
port
port
Cisco ME 3400 Ethernet Access Switch Command Reference
show errdisable detect
2-423
Advertisement
Table of Contents
