Debug Ip Sla Trace Twamp Control Reflector - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
debug ip sla trace twamp control reflector
debug ip sla trace twamp control reflector
Use the debug ip sla trace twamp control reflector command in privileged EXEC mode to enable
debugging output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement
Protocol (TWAMP) normal communications between the TWAMP server and reflector. Use the no form
of this command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.2(52)SE
Usage Guidelines
The debug ip sla trace twamp control reflector privileged EXEC command displays messages about
normal TWAMP session communications sent from the reflector to the server.
Use the debug ip sla error twamp control reflector command before using the debug ip sla trace
Note
twamp control reflector command because the debug ip sla error twamp control reflector command
generates less debugging output.
The debug ip sla trace twamp control reflector command is supported in IPv4 networks.
The undebug ip sla trace twamp control reflector command is the same as the no debug ip sla trace
twamp control reflector command.
Related Commands
Command
debug ip sla error twamp
connection
debug ip sla error twamp
control reflector
debug ip sla error twamp
control server
debug ip sla error twamp
session
debug ip sla trace twamp
connection
Cisco ME 3400 Ethernet Access Switch Command Reference
B-22
debug ip sla trace twamp control reflector
no debug ip sla trace twamp control reflector
Modification
This command was introduced.
Appendix B
Cisco ME 3400 Ethernet Access Switch Debug Commands
Description
Displays exceptions during communication between the IP SLAs
TWAMP client and server.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP sender and reflector.
Displays the normal communications between an IP SLAs TWAMP
client and server.
OL-9640-10
Advertisement
Table of Contents
