Cisco ME 3400 Command Reference Manual page 102

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

define interface-range

For physical interfaces:

When you define a range, you must enter a space before the hyphen (-), for example:

gigabitethernet0/1 - 2

You can also enter multiple ranges. When you define multiple ranges, you must enter a space after the

first entry before the comma (,). The space after the comma is optional, for example:

fastethernet0/3, gigabitethernet0/1 - 2

fastethernet0/3 -4, gigabitethernet0/1 - 2

This example shows how to create a multiple-interface macro:

Switch(config)# define interface-range macro1 fastethernet0/1 - 2, gigabitethernet0/1 - 2

Related Commands

interface range

show running-config

Cisco ME 3400 Ethernet Access Switch Command Reference

module is always 0.

the range is type 0/number - number (for example, gigabitethernet 0/1 - 2).

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Executes a command on multiple ports at the same time.

Displays the operating configuration. For syntax information, use this

link to the Cisco IOS Release 12.2 Command Reference listing page:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_com

mand_reference_list.html

Select the Cisco IOS Commands Master List, Release 12.2 to

navigate to the command.