Show Mac Access-Group - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show mac access-group
show mac access-group
Use the show mac access-group user EXEC command to display the MAC access control lists (ACLs)
configured for an interface or a switch.
Syntax Description
interface interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac-access group user EXEC command. In this display,
Fast Ethernet interface 0/2 has the MAC access list macl_e1 applied to inbound traffic; no MAC ACLs
are applied to other interfaces.
Switch> show mac access-group
Interface FastEthernet0/1:
Inbound access-list is macl_e1
Outbound access-list is not set
Interface FastEthernet0/2:
Inbound access-list is not set
Outbound access-list is not set
Interface FastEthernet0/3:
Inbound access-list is not set
Outbound access-list is not set
Interface FastEthernet0/4:
Inbound access-list is not set
Outbound access-list is not set
Interface FastEthernetv0/5:
Inbound access-list is not set
Outbound access-list is not set
<output truncated>
Cisco ME 3400 Ethernet Access Switch Command Reference
2-514
show mac access-group [interface interface-id] [ | {begin | exclude | include} expression]
(Optional) Display the MAC ACLs configured on a specific interface. Valid
interfaces are physical ports and port channels; the port-channel range is 1
to 48 (available only in privileged EXEC mode).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10
Advertisement
Table of Contents
