Cisco ME 3400 Command Reference Manual page 105

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Command History

Usage Guidelines

You can add deny clauses to drop ARP packets based on matching criteria.

This example shows how to define an ARP access list and to deny both ARP requests and ARP responses

from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:

Switch(config)# arp access-list static-hosts

Switch(config-arp-nacl)# deny ip host 1.1.1.1 mac host 0000.0000.abcd

Switch(config-arp-nacl)# end

You can verify your settings by entering the show arp access-list privileged EXEC command.

Related Commands

arp access-list

ip arp inspection filter vlan

permit (ARP access-list

configuration)

show arp access-list

Modification

This command was introduced.

The command was supported in the metro base image.

Defines an ARP access control list (ACL).

Permits ARP requests and responses from a host configured with a

static IP address.

Permits an ARP packet based on matches against the DHCP bindings.

Displays detailed information about ARP access lists.

Cisco ME 3400 Ethernet Access Switch Command Reference

deny (ARP access-list configuration)