Cisco ME 3400 Command Reference Manual page 147

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

For information about other CFM and Ethernet OAM commands, see the Cisco IOS Carrier Ethernet

Command Reference at:

http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html

This example shows how to configure an Ethernet OAM template for remote-failure indication when an

unrecoverable error has occurred and how to apply it to an interface:

Switch(config)# template oam1

Switch(config-template)# ethernet oam remote-failure dying-gasp action error-disable

Switch(config-template)# exit

Switch(config)# interface gigabitethernet 0/1

Switch(config-if)# source template oam1

Switch(config-if)# exit

This example shows how to configure an Ethernet OAM remote-failure indication on one interface for

unrecoverable errors:

Switch(config)# interface gigabitethernet 0/1

Switch(config-if)# ethernet oam remote-failure dying-gasp action error-disable interface

Switch(config-if)# exit

Related Commands

show ethernet oam

status [interface

interface-id]

Displays configured Ethernet OAM remote failure conditions on all

interfaces or on the specified interface.

Cisco ME 3400 Ethernet Access Switch Command Reference

ethernet oam remote-failure