Cisco ME 3400 Command Reference Manual page 908

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show platform policer cpu

This example shows the policers assigned to a ENI when control protocols are enabled on the interface.

A value of 22 indicates that protocol packets are rate-limited for that protocol. When the protocol is not

enabled, the defaults are the same as for a UNI.

Switch# show platform policer cpu interface fastethernet0/23

Policers assigned for CPU protection

===================================================================

===================================================================

SWITCH_ROUTER_MAC

This example shows the default policers assigned to NNIs. Most protocols have no policers assigned to

NNIs. A value of 255 means that no policer is assigned to the port for the protocol.

Switch #show platform policer cpu interface gigabitethernet 0/1

Policers assigned for CPU protection

===================================================================

===================================================================

SWITCH_ROUTER_MAC

Cisco ME 3400 Ethernet Access Switch Command Reference

Cisco ME 3400 Ethernet Access Switch Show Platform Commands