Cisco ME 3400 Command Reference Manual page 47

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

This example shows how to set outclass1 as a priority queue, with outclass2, and outclass3 getting 50

and 20 percent, respectively, of the bandwidth remaining after the priority queue is serviced. The class

class-default gets the remaining 30 percent with no guarantees.

Switch(config)# policy-map out-policy

Switch(config-pmap)# class outclass1

Switch(config-pmap-c)# priority

Switch(config-pmap-c)# exit

Switch(config-pmap)# class outclass2

Switch(config-pmap-c)# bandwidth remaining percent 50

Switch(config-pmap-c)# exit

Switch(config-pmap)# class outclass3

Switch(config-pmap-c)# bandwidth remaining percent 20

Switch(config-pmap-c)# exit

Switch(config-pmap)# exit

Switch(config)# interface fastethernet 0/1

Switch(config-if)# service-policy output out-policy

Switch(config-if)# exit

You can verify your settings by entering the show policy-map privileged EXEC command.

Related Commands

show policy-map

Defines a traffic classification match criteria for the specified class-map name.

Creates or modifies a policy map that can be attached to multiple ports to

specify a service policy.

Displays quality of service (QoS) policy maps.

Cisco ME 3400 Ethernet Access Switch Command Reference