Cisco ME 3400 Command Reference Manual page 112

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

deny (MAC access-list configuration)

lsap lsap-number mask

Though visible in the command-line help strings, appletalk is not supported as a matching condition.

To filter IPX traffic, you use the type mask or lsap lsap mask keywords, depending on the type of IPX

encapsulation being used. Filter criteria for IPX encapsulation types as specified in Novell terminology

and Cisco IOS terminology are listed in

IPX Encapsulation Type

Cisco IOS Name

novell-ether

This command has no defaults. However; the default action for a MAC-named ACL is to deny.

Command Modes

MAC-access list configuration

Command History

Cisco ME 3400 Ethernet Access Switch Command Reference

(Optional) Use the LSAP number (0 to 65535) of a packet with

IEEE 802.2 encapsulation to identify the protocol of the packet.

mask is a mask of don't care bits applied to the LSAP number before

testing for a match.

(Optional) Select EtherType DEC-MOP Remote Console.

(Optional) Select EtherType DEC-MOP Dump.

(Optional) Select EtherType DEC-MSDOS.

(Optional) Select EtherType DEC-MUMPS.

(Optional) Select EtherType DEC- Network Basic Input/Output System

(Optional) Select EtherType Virtual Integrated Network Service

(VINES) Echo from Banyan Systems.

(Optional) Select EtherType VINES IP.

(Optional) Select EtherType Xerox Network Systems (XNS) protocol

suite (0 to 65535), an arbitrary Ethertype in decimal, hexadecimal, or

IPX Filtering Criteria

Ethernet-snap

Ethernet 802.2

Ethernet 802.3

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Filter Criterion

Ethertype 0x8137