show errdisable detect
show errdisable detect
To display error-disable detection status, use the show errdisable detect command in user EXEC mode.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
The
•
•
•
A displayed
(SFP) interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show errdisable detect command:
Switch> show errdisable detect
ErrDisable Reason
-----------------
arp-inspection
bpduguard
channel-misconfig (STP)
community-limit
dhcp-rate-limit
dtp-flap
gbic-invalid
invalid-policy
link-flap
link-monitor-failure
loopback
lsgroup
oam-remote-failure
Cisco ME 3800X and ME 3600X Switch Command Reference
-52
show errdisable detect [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
column shows the shutdown mode that was configured for the error-disabled reason:
Mode
port—The physical port is error disabled if a violation occurs.
vlan—The virtual port is disabled if a violation occurs.
port/vlan—Some ports are configured for physical port disable, and others are configured for virtual
port disable. Enter the show running config privileged EXEC command to see the configuration for
each port.
error in the
gbic-invalid
column refers to an invalid small form-factor pluggable
Reason
Detection
Mode
---------
----
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Enabled
port
Chapter
OL-28238-01