Cisco ME 3800X Command Reference Manual page 322
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
show diagnostic
Command History
Release
12.2(52)EY
Usage Guidelines
The show diagnostic post command output is the same as the show post command output.
The show diagnostic result [detail] command output is the same as the show diagnostic switch [detail]
command output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This example shows how to display the diagnostic test IDs and attributes.
Switch> show diagnostic content
Diagnostics test suite attributes:
ID
==== ================================== ============
This example shows how to display the diagnostic test results for a switch. You can also use the show
diagnostic switch command to display these results.
Switch> show diagnostic result
:
Overall diagnostic result: UNTESTED
Test results: (. = Pass, F = Fail, U = Untested)
This example shows how to display the running tests in a switch:
Switch> show diagnostic status
<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
<OD> - OnDemand Diagnostics, <SCH> - Scheduled Diagnostics
====== ================================= =============================== ======
Card
------ --------------------------------- ------------------------------- ------
sw
====== ================================= =============================== ======
Cisco ME 3800X and ME 3600X Switch Command Reference
-46
Modification
This command was introduced.
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
Test Name
1) TestPortAsicMem -----------------> B*D*R*
2) TestPortAsicCam -----------------> B*D*R*
3) TestPortAsicLoopback ------------> B*D*R*
4) TestPortLoopback ----------------> B*D*R*
5) TestFpga ------------------------> B*D*R*
SerialNo : FHH1329P00B
1) TestPortAsicMem -----------------> U
2) TestPortAsicCam -----------------> U
3) TestPortAsicLoopback ------------> U
4) TestPortLoopback ----------------> U
5) TestFpga ------------------------> U
Description
FHH1329P00B
Attributes
Current Running Test
N/A
Chapter
Run by
N/A
OL-28238-01
Advertisement
Table of Contents
