Clear Rep Counters - Cisco ME 3800X Command Reference Manual

Hide thumbs Also See for ME 3800X:

Table of Contents

clear rep counters

To clear Resilient Ethernet Protocol (REP) counters for the specified interface or all interfaces, use the

clear rep counters command in privileged EXEC mode.

Syntax Description

interface interface-id

No default is defined.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

You can clear all REP counters by using the clear rep counters command, or you can clear only the

counters for the interface by using the clear rep counters interface interface-id command.

When you enter the clear rep counters command, only the counters visible in the output of the show

interface rep detail command are cleared. SNMP visible counters are not cleared as they are read-only.

You can verify that REP information was deleted by entering the show interfaces rep detail privileged

EXEC command.

This example shows how to clear all REP counters for all REP interfaces:

Switch# clear rep counters

Related Commands

show interfaces rep detail

Cisco ME 3800X and ME 3600X Switch Command Reference

clear rep counters [interface interface-id]

(Optional) Specifies a REP interface whose counters should be cleared.

Modification

This command was introduced.

Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands

Displays detailed REP configuration and status information.