Show Archive Status - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Chapter
show archive status
To display the status of a new image being downloaded to a switch with the HTTP or the TFTP protocol,
use the show archive status command in privileged EXEC mode.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the show archive status command shows the status of the download.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
Related Commands
Command
archive download-sw
OL-28238-01
show archive status [ |{begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Downloads a new image from a TFTP server to the switch.
Cisco ME 3800X and ME 3600X Switch Command Reference
show archive status
-29
Advertisement
Table of Contents
