Lacp Max-Bundle - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
lacp max-bundle
lacp max-bundle
To configure the Link Aggregation Control Protocol (LACP) maximum number of ports to bundle in the
port channel, use the lacp max-bundle command in interface configuration mode. To return to the
default setting, use the no form of this command.
Syntax Description
number-of-bundles
Defaults
The default is 8.
Command Modes
Interface configuration
Command History
Release
15.3(1)S
Usage Guidelines
You can configure the maximum number of members that can be bundled. Any members in excess of
this maximum number are kept in hot-standby state and are transitioned to bundled state when one of the
bundled members goes down.
For information about configuring LACP on physical ports, see the "Configuring EtherChannels"
chapter in the software configuration guide for this release.
Examples
This example shows how to configure the maximum number of ports to bundle in a port channel:
Switch(config)# interface port-channel 3
Switch(config-if)# lacp max-bundle 3
Related Commands
Command
show etherchannel summary
show etherchannel details
show etherchannel portchannel
number portchannel
show etherchannel summary
show lacp internal
Cisco ME 3800X and ME 3600X Switch Command Reference
2-132
lacp max-bundle number-of-bundles
no lacp max-bundle
Number of bundles. The range is 1 to 8.
Modification
This command was introduced.
Chapter 2
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
Description
Displays a one-line summary per channel-group
Displays detailed EtherChannel information.
Displays port-channel information.
Displays a one-line summary per channel-group.
Displays internal information for all channel groups or for
the specified channel group.
OL-28238-01
Advertisement
Table of Contents
