show flowcontrol
show flowcontrol
To display the flow control status and statistics, use the show flowcontrol command in user EXEC mode.
Syntax Description
interface interface-id
module number
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
Use this command to display the flow control status and statistics on the switch or for a specific interface.
Use the show flowcontrol command to display information about all the switch interfaces. The output
from the show flowcontrol command is the same as the output from the show flowcontrol module
number command.
Use the show flowcontrol interface interface-id command to display information about a specific
interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show flowcontrol command.
Switch> show flowcontrol
Port
---------
Gi0/1
Gi0/2
Gi0/3
<output truncated>
Cisco ME 3800X and ME 3600X Switch Command Reference
-62
show flowcontrol [interface interface-id | module number] [ | {begin | exclude | include}
expression]
(Optional) Displays the flow control status and statistics for a specific
interface.
(Optional) Displays the flow control status and statistics for all interfaces on the
switch. The only valid module number is 1. This option is not available if you
have entered a specific interface ID.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Send FlowControl
admin
oper
-------- -------- -------- --------
Unsupp.
Unsupp.
desired
off
desired
off
Receive FlowControl
RxPause TxPause
admin
oper
------- -------
off
off
0
off
off
0
off
off
0
0
0
0
OL-28238-01
Chapter