Show Flowcontrol - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
show flowcontrol
show flowcontrol
Use the show flowcontrol user EXEC command to display the flow control status and statistics.
Syntax Description
interface interface-id
module number
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
Use this command to display the flow control status and statistics on the switch or for a specific interface.
Use the show flowcontrol command to display information about all the switch interfaces. For a
standalone switch, the output from the show flowcontrol command is the same as the output from the
show flowcontrol module number command.
Use the show flowcontrol interface interface-id command to display information about a specific
interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show flowcontrol command.
Switch> show flowcontrol
Port
---------
Gi2/0/1
Gi2/0/2
Gi2/0/3
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-442
show flowcontrol [interface interface-id | module number] [ | {begin | exclude | include}
expression]
(Optional) Display the flow control status and statistics for a specific
interface.
(Optional) Display the flow control status and statistics for all interfaces on the
switch or specified stack member.
On stacking-capable switches, the range is 1 to 9.
On nonstacking-capable switches, the only valid module number is 1.
This option is not available if you have entered a specific interface ID.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Send FlowControl
admin
oper
-------- -------- -------- --------
Unsupp.
Unsupp.
desired
off
desired
off
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Receive FlowControl
RxPause TxPause
admin
oper
------- -------
off
off
0
off
off
0
off
off
0
0
0
0
OL-13271-01
Advertisement
Table of Contents
