Mkdir - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Boot Loader Commands

mkdir

Use the mkdir boot loader command to create one or more new directories on the specified file system.

Syntax Description

/directory-url

Command Modes

Command History

Usage Guidelines

Directory names are case sensitive.

Directory names are limited to 45 characters between the slashes (/); the name cannot contain control

characters, spaces, deletes, slashes, quotes, semicolons, or colons.

This example shows how to make a directory called Saved_Configs:

switch: mkdir flash:Saved_Configs

Directory "flash:Saved_Configs" created

This example shows how to make two directories:

switch: mkdir flash:Saved_Configs1 flash:Test

Directory "flash:Saved_Configs1" created

Directory "flash:Test" created

You can verify that the directory was created by entering the dir filesystem: boot loader command.

Related Commands

mkdir filesystem:/directory-url ...

Alias for a Flash file system. Use flash: for the system board Flash device.

Name of the directories to create. Separate each directory name with a space.

Modification

This command was first introduced.

Displays a list of files and directories on the specified file system.

Removes one or more directories from the specified file system.

Catalyst 3550 Multilayer Switch Command Reference