Table of Contents
Advertisement
29
673
logging binding
switchxxxxxx(config-nbr-binding)# exit
Example 3—The following example remove an attached Neighbor Binding policy:
switchxxxxxx(config)#
Policy policy1 is applied on the following ports:
gi11, gi12
The policy1 will be detached and removed, are you sure [Y/N]Y
29.48 ipv6 neighbor binding static
To add a static entry to the Neighbor Binding table, use the ipv6 neighbor binding
static command in Global Configuration mode. To remove the static entry, use the
no form of this command.
Syntax
ipv6 neighbor binding static ipv6
mac-address
mac
no ipv6 neighbor binding static ipv6
Parameters
•
ipv6-address
ipv6
•
vlan-id
vlan
—ID of the specified VLAN.
•
interface
interface-id
•
mac-address
mac
Default Configuration
No static entry.
Command Mode
Global Configuration mode
no ipv6 neighbor binding policy policy1
ipv6-address
ipv6-address
—IPv6 address of the static entry.
—Adds static entries to the specified port.
—MAC address of the static entry.
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
IPv6 First Hop Security
vlan-id
vlan
interface
vlan-id
vlan
interface-id
Advertisement
Table of Contents
