Ipv6 Neighbor Binding Static - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

IPv6 First Hop Security

OL-32830-01 Command Line Interface Reference Guide

logging binding

switchxxxxxx(config-nbr-binding)# exit

Example 3—The following example remove an attached Neighbor Binding policy:

switchxxxxxx(config)#

Policy policy1 is applied on the following ports:

The policy1 will be detached and removed, are you sure [Y/N]Y

25.48 ipv6 neighbor binding static

To add a static entry to the Neighbor Binding table, use the ipv6 neighbor binding

static command in Global Configuration mode. To remove the static entry, use the

no form of this command.

ipv6 neighbor binding static ipv6

no ipv6 neighbor binding static ipv6

ipv6-address

—ID of the specified VLAN.

interface-id

Default Configuration

No static entry.

Command Mode

Global Configuration mode

no ipv6 neighbor binding policy policy1

ipv6-address

—IPv6 address of the static entry.

—Adds static entries to the specified port.

—MAC address of the static entry.

interface-id